Tavlanmış Tel
İleri teknoloji tel çekme makinelerinde Uluslararası Kalite Standartlarına uygun olarak, düşük sertlik ve yüksek uzama değerleriyle üretilmiş bir üründür.
BOYUTLAR
Teller
- Soğuk Çekilmiş Tellerde çap aralığı: 0,18 mm - 7,60 mm.
- Tavlanmış Tellerde Çap Aralığı: 0,18 mm - 7,60 mm.
Kimyasal Bileşimi ve Mekanik Özellikleri
Grade |
Kimyasal Bileşimi % | Mekanik Özellikler | ||||||
C | Si | Mn | P | S | Yield Strength MPa | Tensile Strength MPa | Elongation % | |
AISI 1006 | 0.05/0.08 | 0.07/0.10 | 0.28/0.38 | 0.03 max. | 0.03 max. | 210 - 270 | 350 - 400 | 28/38 |
AISI 1008 | 0.06/0.09 | 0.08/0.13 | 0.35/0.45 | 0.03 max. | 0.03 max. | 220 - 280 | 360 - 420 | 28/35 |
AISI 1010 | 0.09/0.12 | 0.10/0.15 | 0.40/0.50 | 0.03 max. | 0.03 max. | 260 - 290 | 400 - 430 | 29/32 |
Wire Rods for Welded Mesh and Cold Indented Rebar manufacture
Wire rods of Mesh Grade quality are used to manufacture cold drawn/cold deformed concrete reinforcement bars as well as reinforcement mesh. The wire rods are available in two tensile grades as shown below:
CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES OF MESH GRADE WIRE RODS
Grade |
Chemical Composition % | Mechanical Properties | |
P | S | Tensile Strength MPa | |
Mesh - 1 | 0.05 max. | 0.05 max. | 360/450 |
Mesh - 2 | 0.05 max. | 0.05 max. | 440/500 |
WIRE RODS FOR STICK WELDING ELECTRODES
Welding quality wire rods are used for making wires for stick welding electrodes. The chemical composition is as shown below:
Chemical Composition % |
||||
C | Si | Mn | P | S |
0.10 max | 0.05 max. | 0.30-0.60 | 0.03 max. | 0.03 max. |